Accessories for installation
TEF | Cold Shrink Tube
TEF cold shrink tubes are a series of open-ended tubular silicone/EPDM rubber sleeves, pre-expanded on a removable core for easy installation.
After the core is removed, the tube shrinks to its original diameter guaranteeing a perfect sealing on connectors.
In applications where the different cable diameter cannot be covered with the tube range, a special foam is included in the package.
The strip foam is used to increase the smaller cable diameter and assure the sealing of the clod shrink tube.
Sealing of feeder connections.
TEF offers a timesaving and easy way to secure a waterproof protection.
No tools or heating are requested for installation.
The shrinking process is done by simply unwinding the removable core.
NAS | Self-agglomerating Silicone Tape Protecting, Insulating and Waterproof
– Self agglomerating silicone tape.
– Removable PET protection film.
– Mid line wrapping reference.
The self-agglomerating NAS silicone rubber tape, is ideal to insulate, seal and protect various objects (not only metal ones).
It can be used under extreme temperature conditions,(-50°C,+150°C). NAS tape is non adhesive, and may be used on both sides.
Tightly wrapped around the object, it doesn’t unwind, thanks to its outstanding elasticity.
The single tape layers merge progressively within 24hours.
An immediate excellent waterproofing, as well as mechanical protection and electrical insulation is however guaranteed.
NAS is not subject to aging, is UV rays proof and does not harden.
NAS stands up to 350% elongation, assuring high performances even on complex shape objects.
The mean line represents a useful reference to make a correct tape wrapping superimposition easier.
Remove the protective film just on the application time, avoiding moisture, dirt , dust and grease contamination.
NAS tape is to be kept in its protective plastic bag.
NEP | Self-Agglomerating Tape For Tightening and Insulating
Self-agglomerating Ethylenepropylen (EPR) Rubber, non adhesive, Highly elastic (1000%), not hardening.
Waterproof. insulating (35 kV/mm), U.V. resistant.
Temperature range -40°/ +70°C.
Packed in rolls with protective film.
WPK | Connectors Weatherproofing Kit
For Feeder Cables and Jumpers
FIMO WPK weatherproofing kit provides a reliable sealing of cable connections exposed to the outside environment.
FIMO WPK weatherproofing kit contains:
– 2 rolls of 19 mm x 20 m black PVC tape
– 1 roll of 50 mm x 8 m black PVC tape
– 3 or 6 rolls of 50 mm x 600 mm butylrubber tape
This kit provides an efficient moisture block and connector’s protection against pollution and dust.
It also prevents disconnection of connectors caused by vibrations during wind exposition.
The kit protects cable’s outer jacket and connectors that are directly buried or exposed to severe environmental conditions.
FIMO WPK weatherproofing kit is recommended in applications:
– Jumper to Antenna
– Jumper to Feeder Cable
Features and Benefits
– Simple installation
– No heat or tools required for installation
– Compatible with any connector and cable
– High protection against moisture and dirt
– No loosening of connections