• Skip to main content
  • Skip to footer
Bredengen
MENU
  • Norwegian Bokmål
  • Industries
    • Telecom
    • Industry
    • Maritime
    • Defence
    • Space
    • Aviation
    • Inndoor coverage
    • Transport and Communications
  • Products
    • Radiofrequence
    • Fiberoptic
    • Components
  • Manufacturers
  • About bredengen
Contact us

Professor Birkelandsvei 25,
N-1081 Oslo

+47 21 00 91 00 bredengen@bredengen.no

HjemProdukterRadiofrequencyCoaxial Cables

Coaxial Cables

Bredengen keeps stock and sell coaxial cables for a wide range of applications. Continuous development from our suppliers ensures that the products are fully in line with market requirements and the latest technology.
RG cable with MIL specification

Bredengen AS has a wide range of MIL specified standard RG cables. Both traditional outdoor cables with PVC sheath and indoor cables that are flame retardant, halogen free and comply with the new CPR directive. All MIL Specified cables fit perfectly with our range of RF connectors.

 

Standard range includes among other things

 

FRNC / LSZH / LS0H – Flame Retardant and Halogen Free (CPR):

50 Ohm : RG 58 FRNC / RG 223 FRNC / RG 213 FRNC / RG 214 FRNC

75 Ohm : RG 59 FRNC / RG 11 FRNC

PVC:

50 Ohm : RG 58 / RG 223 / RG 213 / RG 214

75 Ohm : RG 59 / RG 11

 

A wider range of products can be found here

Huber + Suhner RG cables

Siva coaxial cables

 

Need help finding suitable connectors, take a look here:

RF connector

Corrugated low-loss cable / feeder cable

Low-loss cables suitable for outdoor, indoor and maritime environments. As in compliance with IEC norms and CPR directives. We also guarantee flexible connector solutions for our cables.

 

Standard range includes among other things

 

RFA 1/4″-50
RFA 1/2″-50
RFA 7/8″-50
RFA 1 1/4″-50
RFA 1 5/8″-50
Prysmian: feeder cable

Leaky feeders

Radiant cable is coaxial cable with openings in outer conductor. There are many variants of two types:

“Coupled mode”, corrugated and milled outer conductor intended for broadband operation.

“Radiating mode”, hollow foil outer conductor optimized for specific frequency bands.

Coupled Mode  

RFX1/2 BHF

RF2X 1/2-50 BHF

RFX 7/8-50 BHF

RF2X 7/8-50 BHF

RFX 1 1/4-50 BHF

RF2X 1 1/4-50 BHF

RFX 1 5/8-50 BHF

RF2X 1 5/8-50 BHF

Radiating Mode  

RFXT 7/8-50 BHF

RFXT 1 1/4-50 BHF

RFXT 1 5/8-50 BHF (Kommer)

 

Prysmian: Coaxial antenna

MUD-cable

RFA 1/2″-50 MUD

RFA 7/8″-50 MUD

Flexible microwave cables

Our supplier HUBER+SUHNER develops and produces coaxial cables for a wide range of applications all over the world in accordance with international standards. Many years of experience and in-house manufacturing combine to produce a portfolio of components adapted perfectly to one another. Continuous further development ensures that the products are perfectly aligned with market requirements and incorporate the latest technology. An innovative development department with in-house test laboratories can react quickly to changing market trends and even develop customer-specific solutions.

 

Multiflex 53-02

The thin, highly flexible and ultra-stable microwave cable for utmost demands.

 

Multiflex 86

 

 

Multiflex microwave cables are the flexible alternative to semi-rigid cables. They are used in commercial and military RF and microwave airborne systems, communication systems, cellular base stations, satellite, ground systems – in brief: anywhere a flexible semi-rigid cable is required.

 

Multiflex 141

 

 

Multiflex microwave cables are the flexible alternative to semi-rigid cables. They are used in commercial and military RF and microwave airborne systems, communication systems, cellular base stations, satellite, ground systems – in brief: anywhere a flexible semi-rigid cable is required.

 

S-series

 

 

The S-series is a line of cost-efficient, low loss microwave cables. It covers technically demanding requirements in a wide range of applications, preferably in fixed installations. These versatile cables are characterised by their very low insertion loss across a wide frequency range. S-series cables are easy to assemble and are made of environmentally friendly, halogen free materials.

 

Boa-flex I

 

 

Boa-flex I cables utilise a microporous PTFE dielectric for low loss with minimal phase change due to temperature changes and flexure. Typical velocity is 77% of the speed of light. Construction consists of a flat wire braid outer conductor, a metalised polyimide intra-layer and a round wire braid to complete the triple shielded construction. All offer very low loss and are extremely stable with flexure.

 

Boa-flex II

 

 

Boa-flex II cables utilise a microporous PTFE dielectric for low loss with minimal phase change due to temperature changes and flexure. Typical velocity is 77% of the speed of light. All offer very low loss and are extremely stable with flexure.

 

Boa-flex III

 

 

Boa-flex III cable is low cost, high performance designs intended to replace standard flexible MIL-DTL-17 cables. This cable has up to three shields. All have a solid core for excellent crush resistance without the need for armour.

 

Steel-flex I

 

 

Steel-flex cables are lightweight flexible replacements to semi-rigid cables. All utilise triple shields for superior RF shielding, with a solid TFE dielectric for exceptional crush resistance without the need for heavy armour. The flat wire braid outer conductor provides low loss plus excellent insertion loss stability with flexure. The stainless steel outer braid provides improved mechanical pull strength when compared to cables with a copper wire outer braid.

 

Steel-flex Il 

 

 

Steel-flex II cables are designed as low loss alternative to Steel-flex I cables. The microporous dielectric provides improved phase characteristics, such as phase versus flexure and phase versus temperature.

 

Ever-flex

 

 

Ever-flex cables were designed for use in ultradurable, high flexure applications such as gimbal assemblies and installations where the cable assembly must endure multiple tight bends and twists. Ever-flex cable assemblies have repeatedly endured 1 000 000 flexure cycles with minimal electrical and mechanical degradation. All incorporate a flat wire outer conductor and a microporous dielectric for low loss and a tight woven stainless steel outer braid for improved resistance to crushing, bending and kinking.

 

Huber + Suhner – Microwave cables

 

Jumper cable

Prysmian: jumper cables

 

Super and Extra Flexible Cables

Prysmian: RFE cables

Available catalogues

Huber + Suhner – RF Cables

Huber + Suhner – Microwave cables

Produsenter innen Coaxial Cables
  • Huber + Suhner AG (eng.)
  • Prysmian Group (eng.)
  • SIVA (eng.)

Eivind Fosli

Product manager

004792615290 ef@bredengen.no
Koaksialkabel

Professor Birkelandsvei 25, N-1081 Oslo

+47 21 00 91 00
bredengen@bredengen.no

  • Contact us
  • Employees
  • Privacy statement
  • Environmental responsibility
  • Conflict Minerals Policy