Norsk 
Engelsk 
H+S connectors
N connectors
N connectors are available with 50 Ω and 75 Ω impedance. The frequency range extends to 18 GHz, depeding on the connector and cable type. The screw-type coupling mechanism provides a sturdy and reliable connection.
The N connectors are available for flexible cables, for semi-rigid cables and for corrugated copper tube cables.
Compatibility
Inner conductors of N 75 Ω connectors have a smaller diame- ter than those of the 50 Ω version. Therefore 50 Ω and 75 Ω connectors must not be mated with each other.
|
|
Plug |
Jack |
||
|
min. |
max. |
min. |
max. |
|
|
A |
– |
8.38/0.330 |
8.03/0.316 |
8.13/0.320 |
|
B |
5.33/0.210 |
5.84/0.230 |
4.75/0.187 |
5.26/0.207 |
|
C |
– |
3.15/0.124 |
– |
3.15/0.124 |
|
D |
16.00/0.630 |
– |
– |
15.93/0.627 |
|
E |
1.60/0.063 |
1.68/0.066 |
5.33/0.210 |
– |
|
F |
– |
– |
9.04/0.356 |
9.19/0.362 |
|
G |
– |
– |
6.76/0.266 |
– |
|
H |
– |
– |
10.72/0.422 |
– |
Interface dimensions comformable to the standards:
International: IEC 61169-16
Europe: CECC 22 210
USA: MIL-STD-348/304
IP rating (interface, mated) IP68
|
Typical VSWR 1) |
Frequency range |
Cable group |
||||
|
Connector type |
1 GHz |
2.5 GHz |
5 GHz |
12.4 GHz |
18 GHz |
|
|
Straight connectors |
1.04 |
1.05 |
1.08 |
M6 |
||
|
|
1.03 |
1.04 |
1.06 |
1.12 |
|
Y5, Y12 |
|
|
1.03 |
1.04 |
1.05 |
1.07 |
1.09 |
Y5, Y12 |
|
|
1.03 |
1.04 |
1.05 |
1.08 |
1.12 |
Y7 |
|
|
1.05 |
1.09 |
1.17 |
|
|
U7, U9 |
|
|
1.04 |
1.06 |
1.12 |
|
|
U28, U29, U32, U33 |
|
|
1.03 |
1.05 |
1.14 |
|
|
S24 |
|
|
1.03 |
1.05 |
1.10 |
|
|
S39 |
|
Right angle connectors |
1.04 |
1.05 |
1.08 |
|
|
M6 |
|
|
1.04 |
1.05 |
1.06 |
1.12 |
|
Y5, Y12 |
|
|
1.05 |
1.10 |
1.20 |
|
|
U7, U9 |
|
|
1.08 |
1.10 |
1.12 |
|
|
U28, U29, U32, U33 |
Technical data
|
Electrical data |
Requirements |
|
Impedance |
50 Ω |
|
Frequency range
|
DC to 11 GHz DC to 18 GHz |
|
Dielectric withstanding voltage (at sea level) |
2.5 kV rms, 50 Hz |
|
Working voltage (at sea level) |
≤ 1.0 kV rms, 50 Hz |
|
Insulation resistance |
≥ 5 103 MΩ |
|
Contact resistance
|
≤ 1.0 mΩ ≤ 1.0 mΩ |
|
RF leakage (between 2 and 3 GHz) |
≥ 90 dB |
|
VSWR |
see table below |
Admissible power of N connector
|
Mechanical data |
Requirements |
|
Coupling nut torque *Recommended |
0.68 to 1.13 Nm/6.0 to 10.0 in lbs |
|
Coupling nut retention force |
≥ 450 N/101.2 lbs |
|
Contact captivation |
≥ 28 N/6.3 lbs |
|
Cable retention force 1) |
see pages 32 – 41 |
|
Durability (matings) |
≥ 500 |
|
Material data |
||
|
Connector parts |
Material |
Plating |
|
Bodies |
brass |
SUCOPLATE® |
|
Pin contacts |
brass |
gold/SUCOPRO® gold plating |
|
Outer contact, slotted |
spring bronze |
SUCOPLATE® |
|
Female contacts |
copper beryllium alloy, spring bronze |
gold/SUCOPRO® gold plating |
|
Crimp ferrules |
copper |
SUCOPLATE® |
|
Insulators, standard version |
PTFE or PFA |
|
|
Gaskets |
silicone rubber |
|
|
Environmental data |
Requirements |
|
Temperature range |
−65 to +165 °C/−85 to +329 °F |
|
Climatic category |
IEC 55/155/21 |
|
Thermal shock |
MIL-STD-202, method 107, condition B |
|
Moisture resistance |
MIL-STD-202, method 106 |
|
Corrosion |
saltspray test acc. to MIL-STD-202, method 101, condition B |
|
Vibration |
MIL-STD-202, method 204, condition B |
|
Shock |
MIL-STD-202, method 213, condition G |
Performance values are typical for the connector interface. Individual component or connector performance
may vary depending on the connector design, attachment (e.g. cable, PCB) or application.
SMA - coaxial connectors
Description
SMA connectors are precision connectors for microwave applications up to 18 GHz. The extended frequency version operates with exellent return loss performance up to 26.5 GHz. There is a huge variety of application for HUBER + SUHNRT SMA connectors, as in telecom, test+measurement, instruments, avionics, etc.
Interface dimensions (mm/inches)
Plug (male) Jack (female)
|
|
Plug |
Jack |
||
|
|
min. |
max. |
min. |
max. |
|
A |
– |
4.59/1.81 |
4.59/0.181 |
– |
|
B |
0.00/0.000 |
0.25/0.010 |
0.00/0.000 |
0.25/0.010 |
|
C |
0.00/0.000 |
0.25/0.010 |
0.00/0.000 |
0.25/0.010 |
|
D |
– |
2.54/0.100 |
2.67/0.105 |
– |
|
E |
1.24/0.049 |
1.29/0.051 |
1.24/0.049 |
1.29/0.051 |
|
F |
0.38/0.015 |
1.14/0.045 |
1.88/0.074 |
1.98/0.078 |
|
G |
– |
3.43/0.135 |
0.38/0.015 |
1.14/0.045 |
|
H |
0.90/0.036 |
0.94/0.037 |
5.28/0.208 |
5.49/0.216 |
|
I |
– |
– |
4.32/0.170 |
– |
|
K |
– |
– |
5.54/0.218 |
– |
Features
- Frequency range up to 18 GHz, extended frequency version up to 26.5 GHz
- Excellent return loss
- Intermateable with PC3.5 and SK
Interface dimensions comformable to the standards:
International: IEC 60169-15
Europe: CECC 22110
USA: MIL-PRF-39012 SMA
Interface MIL-STD-348/310
Technical data
|
Electrical data |
MIL-C-39012 |
|
|||
|
Impedance |
|
50 Ω |
|||
|
Frequency range for interface |
|
DC to 18 GHz (extended range DC to 26.5 GHz) |
|||
|
RL (typical value) |
|
for cable connectors refer to table below |
|||
|
Cable type |
|
semi-rigid |
flexible |
||
|
Cable dielectric diameter (mm/in) |
|
1.5/0.066 |
3/0.117 |
1.5/0.066 |
3/0.117 |
|
RF leakage measured at 3 GHz |
3.26 |
≥ 100 dB-f (GHz) |
≥ 60 dB |
||
|
Dielectric withstanding voltage (at sea level, in V rms, 50 Hz) |
3.17 |
1000 |
1500 |
750 |
1000 |
|
Working voltage (at sea level, in V rms, 50 Hz) |
|
335 |
500 |
250 |
335 |
|
Corona extinction voltage (at 21 000 m/70 000 ft, in V rms, 50 Hz) |
3.22 |
250 |
375 |
190 |
250 |
|
Working voltage (at 21 000 m/70 000 ft, in V rms, 50 Hz) |
|
85 |
125 |
65 |
85 |
|
RF withstanding voltage at 5 MHz (V rms) |
3.23 |
670 |
1000 |
500 |
670 |
|
Insulation resistance |
3.11 |
≥ 5 ∙ 103 MΩ |
|||
|
Contact resistance
|
3.16 |
≤ 3 mΩ ≤ 2.5 mΩ |
|||
|
Material data |
|||
|
Connector part |
|
Material |
Plating |
|
Bodies, outer contacts, nut |
HUBER+SUHNER standard SMA |
copper-beryllium alloy stainless steel, spring bronze |
gold, passivated |
|
HUBER+SUHNER ECO SMA |
brass, spring bronze |
SUCOPLATE®/ SUCOPRO® gold plating |
|
|
Pin contacts |
|
copper-beryllium alloy, brass |
gold/SUCOPRO® gold plating |
|
Socket contacts |
|
copper-beryllium alloy/spring bronze |
gold |
|
Crimp ferrules |
|
copper, brass |
gold |
|
Insulators |
|
PTFE or PFA |
|
|
Gaskets |
|
silicone rubber |
|
Typical RL for HUBER + SUHNER ECO SMA cable connectors
|
Typical RL (dB) |
Frequency range |
Cable group |
|||
|
Connector type |
1 GHz |
2.5 GHz |
5 GHz |
6 GHz |
|
|
Straight connectors |
36 |
36 |
35 |
30 |
Y3, Y11 |
|
36 |
36 |
35 |
30 |
Y5, Y12 |
|
|
32 |
29 |
26 |
25 |
U2, U4 |
|
|
34 |
32 |
27 |
25 |
U7, U9 |
|
|
Right angle connectors |
36 |
32 |
26 |
25 |
Y3, Y11 |
|
36 |
32 |
28 |
24 |
Y5, Y12 |
|
|
32 |
29 |
26 |
25 |
U2, U4 |
|
|
36 |
32 |
26 |
25 |
U7, U9 |
|
|
Environmental data |
Test conditions |
|
Temperature range |
−65 to +165°C/−85 to +329 °F |
|
Climatic category |
IEC ® 55/155/21 |
|
Thermal shock |
MIL-STD-202, method 107, condition B |
|
Moisture resistance |
MIL-STD-202, method 106 |
|
Corrosion |
saltspray test acc. to MIL-STD-202, method 101, condition B |
|
Vibration |
MIL-STD-202, method 204, condition D |
|
Shock |
MIL-STD-202, method 213, condition I |
|
|
Except the hermetic sealed SMA connectors all other connector types satisfy RoHS compability. |
|
Mechanical data |
MIL-C-39012 |
|
|
|
Recommended coupling nut torque |
|
HUBER+SUHNER standard SMA |
0.8 to 1.1 Nm (7.1 to 9.7 in lbs) |
|
|
HUBER+SUHNER ECO SMA |
0.45 Nm (4.0 in lbs) |
|
|
Coupling nut retention force |
3.25 |
|
≥ 270 N/60.7 lbs |
|
Contact captivation
|
3.12 |
HUBER+SUHNER standard SMA |
≥ 27 N/6.1 lbs |
|
|
HUBER+SUHNER ECO SMA |
≥ 20 N/5.4 lbs |
|
|
Cable retention force 1) |
|
see suitable cables, pages 32 – 41 |
|
|
Durability (matings) |
|
|
≤ 500 |
Performance values are typical for the connector interface. Individual component or connector performance may vary depending on the connector design, attachment (e.g. cable, PCB) or application.
