Norwegian 
English 
Acuteq Mini OTDR 1310/1550nm
The ATO-A1 OTDR series is utilized for the installation and maintenance of fiber optic cables. It offers a range of advantages, including highly accurate testing capabilities, rapid response times, and user-friendly operation. Specifically designed to provide precise and rapid results, the ATO-A1 series streamlines the report generation process. This simplifies maintenance, troubleshooting, and optimization of fiber optic networks, ensuring efficient and reliable performance.
Features
-
4.3-inch HD touch screen
-
Measures distances as short as 2 meters
-
Covers full range of user interface including USB A, Micro-USB and SD card
-
Ultra-high battery capacity and portable power bank
| General specification | |
| Display | 4.3 inch HD (touch screen) |
| Battery | 3.7 V/5200mAh X 1 lithium battery Continuously test: > 8 hours (backlight off) |
| Charging time: 3 hours with adapter; 10 hours with USB | |
| Data Storage | 100,000 groups of curves |
| Interface | USB A Type×1, Micro-USB×1, 16GB SanDisk |
| Working Temp | -10℃~+50℃ |
| Storage Temp | -20℃~+70℃ |
| Humidity | ≤95% (non-condensation) |
| Accessories | Main unit, 12V power adapter, Lithium battery, FC adapter, USB cord, User guide, carrying case, wrist belt |
| Dimension | 7.1× 4.3×1.8 inches/ 1.54 pounds (battery included) 180×110×46 mm/ 0.7kg (battery included) |
| Single Mode | Multi-Mode | |
| Wavelength | 1310nm, 1550nm (Standard） 1625nm、1650nm (Optional with MOQ) |
850nm, 1300nm (Optional with MOQ) |
| Dynamic range | ATO-A1-S20 ATO-A1-S22 ATO-A1-D22 ATO-A1-D24 ATO-A1-D26 |
20 dB @1550nm 22 dB @1550nm 22/20 dB @1310/1550nm 24/22 dB @1310/1550nm 26/24 dB @1310/1550nm |
| Testing Distance | 70km, 80km, 90km | |
| Sampling Resolution | Minimum 10cm | |
| Sampling Point | Maximum 64,000 points | |
| Linearity | ≤0.05dB/dB | |
| Scale Indication | X axis: 4-70m/div, Y axis: 0.09-5dB/div | |
| Loss Threshold | 0.01dB | |
| Loss Resolution | 0.001dB | |
| Distance Resolution | 0.01m | |
| Distance Accuracy | ±(1m+measuring distance×3×10^-5+sampling resolution) | |
| Refraction Setting | 1.2000~1.5999, 0.0001 step | |
| Dynamic Range | 20~26dB (22dB/24dB) | |
| Dead Event Zone | 1.2m/5.5m (2m/8m) | |
Dynamic range is measured with maximum pulse width, averaging time is 3 minutes, SNR=1; The level difference between the RMS noise level and the level where near end back-scattering occurs.
Event dead zone is measured with pulse width of 3ns; attenuation dead zone is measured with pulse width of 5ns.
